- EFFICIENT PERFORMANCE - This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeding Chute for up to 3" MAX branches, limbs & garden debris. CR12MoV cutting blades (x2) debris
- UNIQUE DESIGN - Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
- POWERFUL - This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity. Max speed: 3600RPM，Max torque: [email protected] (ENGINE OIL NOT INCLUDED)
- SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection; This machine is EPA/CARB Certified
- BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves, and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines. Can be used to aid in fire prevention and building firebreaks.
- PRECISE CUTTING PERFORMANCE: DK2 Power stump grinder provides a direct belt drive system, eliminating clutch slippage and demands a 100% cutting performance from the 12 inch, 50 pound cutting head
- GAS POWERED: Commercial frame implementing a Kohler 14HP CH440 engine, with a dual direct v-belt drive providing a cutting speed of 3600 RPM
- SAFETY MATERIALS: Includes safety keys, ear protection, safety glasses, work gloves, tools and a oil bottle
- EASY TRANSPORTATION: Constructed with dual locking hitch pins, for trouble free wheel breaks and an easier transportation over rough terrain
- INCLUDES: 9 Direct Drive carbide teeth, dual locking ATV tires, adjustable heavy duty
- 【Disc Dimension】 Stump Grinder Disc Arbor size : 5/8" (16mm)/Diameter: 4"/Suit For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (RPM) :14000; Wheel thickness:0.8cm;
- 【Unique Chromium Plating Reinforcement Chain】The improved patented tooth profile, the use of excellent materials, superb heat treatment, and hard chromium plating reinforcement will give you a better experience.
- 【Optimised Galvanized Steel Sheet】After simulation analysis, GOCIA uses a 0.8mm thick galvanized steel sheet to reduce weight while ensuring sufficient strength to make the stump grinder work safely.
- 【Disc and Chain Upgrade】 GOCIA focas on technological innovation, continues to upgrade products, and develops all kinds fo chains to meet various working conditions and use frequency. Whether you are a DIY user or a professional user, we will launch more cost-effective products to serve you.
- 【Attention and Warning】To avoid incorrect operation result in personal injury,please strictly follow the instructions.Install the angle grinder protective cover, wear protective glasses and anti-cut gloves, and use this product carefully.
- 【Material and Life】The xdovet angle grinder disc is made of high quality carbon steel, high hardness, high compressive strength, good wear resistance, polishing and grinding with less effort, each sharp tooth is very sharp, not easy to break or deformation, high hardness, high safety and long life.
- 【Multiple Applications】 The wood grinding forming disc is a universal accessory for angle grinders. It has a wide range of applications and is suitable for any wood products. It can be used for grinding, trimming, carving, root carving, polishing, etc. It has very good wear resistance and can bring you great work efficiency, more importantly, it will not cause arm soreness.
- 【What you will get】Four different woodworking discs, from rough sanding to detailed sanding can be solved in one go, no need to buy additional sanding discs, to help you solve all your problems
- 【Suitable for Most Angle Grinders】The outer diameter is 4 inches and the Arbor is 5/8 inches. The shaping wheel is suitable for all 4 inches or 4-1/2 inches angle grinders on the market.
- 【XDOVET SERVICE】 If you find Any Problems when you use them, feel free to contact us. We would try our best to assist you and ensure your satisfaction.
- [Upgraded Design] After reviewing all the complaints of wood carving disc for angle grinder, our engineer upgraded the center hole diameter to be compatible with 4" and 4 1/2" angle grinder. The grooves of the wood carving disc has been enlargerd to fit widely used 1.61" black flange nut. So all the parts work right out of the box.
- [Basic Tool for Power Wood Carving Beginners] The RASP package includes 1 piece of wood grinding wheel (4" dia × 7/8" bore), 1 piece of silver bushing(7/8" to 5/8"). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor. Considering its extremely low price, it is very suitable for beginners to start power wood carving at a very low cost or as one of the tools in a home repair kit.
- [Cope with Different Occasions] The angle grinder wood carving disc consists of hundreds of pointed teeth that remove remove residue or hard material quickly, which are more durable than hundreds of sandpaper pads. Super useful when you want to round the corners. Designed for rough work or moderate carving, especially soft woods. An excellent tool for quickly removing rough, damaged, or excess wood from the surface of a wooden surface.
- [Practical Tool Set] With rapid cutting and grinding speed, the wood grinding wheel is great for non-metallic materials, suitable for any wood, cutting everything from hardwood, plastic and other soft materials, without worrying about hard places such as wood bumps. Ideal for grinding, carving, and removing small tree stumps. Good wears resistance, can serve you for a long time.
- [6 Pages Instructions] Many customers do not know how to use the wood shaping disc properly, which is very dangerous. Therefore, this kit comes with a detailed usage instructions, including installation, considerations maintenance and so on. If you have any technical questions, please feel free to contact us, we have professional engineers to serve you.
- This chain saw blades for angle grinder are cutting discs for wood which can cut, carve, scrape and shape, and can also be used to remove small stumps. A great tool for cutting wood materials.
- The teeth on the chain are made of 65SMn Steel and the base is made of high quality stainless steel, which is hard and resistant to wear and tear, further extending the life of the saw blade.
- The chain as well as the saw teeth head are fixed between two steel plates, solid and tight, providing good grip for easy and safe cutting and smooth cutting.
- The 8-tooth(115mm)/9 tooth(125mm) chain saw blade design makes it easy to make straight and short cuts. Swooping cut is suitable for rough carving. Can also cut upward on curved surfaces.
- 7/8" arbor is suitable for most angle grinders. Capable of easily cutting wood, various wood laminates, flooring, plywood, MDF and other wood materials.
- REVOLUTIONARY 3-TOOTH DESIGN- Three semicircle YG8 tungsten carbide teeth reduce drag and ensure smooth grooving, grinding, cutting and carving; Mounting bore: 7/8" (22 mm)
- ANTIKICKBACK DESIGN- The disc body is specially designed with feed stop preventing the disc from being submerged into the material uncontrolled, which in turn prevents the kickback
- HEAT-RESISTANT- Never overheat even after continuous work ensuring safe work with the heat-resistant Teflon coated surface at high rotation speed rates 13200 RPM
- DURABLE TEFLON COATING- Teflon coated for long service life owing to the Low Coefficient of Friction of the Teflon(PTFE) material; Ideal for being used as grinder shaping disc, sculpting and cutting wheel and also circular saw blade
- WIDE APPLICATIONS- Allows easy multipurpose work on wood, plywood, laminated flooring, parquet (hardwood), plasterboard, MDF (hardboard), chipboard, aerated concrete, plasterboard and plastic, etc.
- 【Angle Grinder Cutting Disc for Wood】This chain saw blades for angle grinder are cutting discs for wood which can cut, carve, scrape and shape, and can also be used to remove small stumps. A great tool for cutting wood materials.
- 【Made of High Quality Materials】The teeth on the chain are made of 65SMn Steel and the base is made of high quality stainless steel, which is hard and resistant to wear and tear, further extending the life of the saw blade.
- 【Sturdy and Safe】The chain as well as the saw teeth head are fixed between two steel plates, solid and tight, providing good grip for easy and safe cutting and smooth cutting.
- 【Chain Saw Type Woodworking Cutting Blade】The 8-tooth(115mm)/9 tooth(125mm) chain saw blade design makes it easy to make straight and short cuts. Swooping cut is suitable for rough carving. Can also cut upward on curved surfaces.
- 【Multi-purpose Wood Cutter】7/8" arbor is suitable for most angle grinders. Capable of easily cutting wood, various wood laminates, flooring, plywood, MDF and other wood materials.
- Replace OEM Part: 503599205, 503476901, 503553201, 503406401, 503405701, 503599001
- Fit Models: Husqvarna 61, 268, 268 Special, 272, 272XP Chainsaws & 268K, 272K Cut Off Saws & 272S Stump Grinder
- Exhaust Muffler Gasket Bracket Kit is Used to Reduce The Noise Created By The Chainsaw Engine
- Package Includes: 1 x Exhaust Muffler, 1 x Muffler Gasket, 1 x Bracket
- Brand New and High-Quality Exhaust Muffler Kit Replacement For Husqvarna 61 262 272 272XP Chainsaw Parts